background image
EN
Official Journal of the European Communities
15.8.2002
L 220/54
Ref. No
OTHERSPECIFICATIONS
-- Lead
Not more than 2 mg/kg of plastic
-- Arsenic
Not more than 1 mg/kg of plastic
-- Chromium
Not more than 1 mg/kg of plastic
23547
Polydimethylsiloxane (Mw
> 6 800)
Minimum viscosity 100
10
6
m
2
/s (= 100 centistokes) at 25
C
25385
Triallylamine
40 mg/kg hydrogel at a ratio of 1 kg food to a maximum of 1,5 grams of hydrogel. For use only in hydrogels intended for
non-direct food contact use.
38320
4-(2-Benzoxazolyl)-4 -(5-methyl-2-benzoxazolyl) stilbene
Not more than 0,05 %w/w (quantity of substance used/quantity of the formulation)
43680
Chlorodifluoromethane
Content of chlorofluoromethane less than 1 mg/kg of the substance
47210
Dibutylthiostannoic acid polymer
Molecular unit = (C
8
H
18
S
3
Sn
2
)n (n = 1,5-2)
76721
Polydimethylsiloxane (Mw
> 6 800)
Minimum viscosity 100
10
6
m
2
/s (= 100 centistokes) at 25
C
83595
Reaction product of di-tert-butylphosphonite with biphenyl, obtained by condensation of 2,4-di-tert-butylphenol with Friedel Craft
reaction product of phosphorous trichloride and biphenyl
Composition:
-- 4,4 -Biphenylene-bis[0,0-bis(2,4-di-tert-butylphenyl)phosphonite] (CAS.No 38613-77-3) (36-46 % w/w (*)),
-- 4,3 -Biphenylene-bis[0,0-bis(2,4-di-tert-butylphenyl)phosphonite] (CAS.No 118421-00-4 (17-23 % w/w (*)),
-- 3,3 -Biphenylene-bis[0,0-bis(2,4-di-tert-butylphenyl)phosphonite] (CAS.No 118421-01-5) (1-5 % w/w (*)),
-- 4-Biphenylene-0,0-bis(2,4-di-tert-butylphenyl)phosphonite (CAS.No 91362-37-7) (11-19 % w/w (*)),
-- Tris(2,4-di-tert-butylphenyl)phosphite (CAS.No 31570-04-4) (9-18 % w/w (*)),
-- 4,4 -Biphenylene-0,0-bis(2,4-di-tert-butylphenyl)phosphonate-0,0-bis(2,4-di-tert-butylphenyl)phosphonite (CAS.No 112949-97-
0) (
< 5 % w/w (*)).
Other specifications:
-- Phosphor content of min. 5,4 % to max. 5,9 %
-- Acid value of max. 10 mg KOH per gram
-- Melt range of 85-110
C
88640
Soybean oil, epoxidized
Oxirane
< 8 %, iodine number < 6
95859
Waxes, refined, derived from petroleum based or synthetic hydrocarbon feedstocks
The product should have the following specifications:
-- Content of mineral hydrocarbons with Carbon number less than 25, not more than 5 % (w/w)
-- Viscosity not less than 11
10
6
m
2
/s (= 11 centistokes) at 100
C
-- Average molecular weight not less than 500.
95883
White mineral oils, paraffinic derived from petroleum based hydrocarbon feedstocks
The product should have the following specifications:
-- Content of mineral hydrocarbons with Carbon number less than 25, not more than 5 % (w/w)
-- Viscosity not less than 8,5
10
6
m
2
/s (= 8,5 centistokes) at 100
C
-- Average molecular weight not less than 480
(*) Quantity of substance used /quantity of formulation